Hey guys,
I'm using the Star TSP100 futurePRNT printer with your software and I'm having issues. It's cutting the receipt too early. Do you know how I can adjust this? Is it something to do with the Post Print Command?
Any advice would be helpful.
Cheers,
Will
Hi Will,
Welcome to the forums! 
The code 27,100,48 should send 48 line feeds to your printer as an ESC/POS command, so not sure why it isn't feeding through enough to clear the printing before it cuts.
In the post print command can you replace 27,100,48 with 10,10,10,10 - the 10's are line feeds and are another way of getting the paper to feed after a print job. Add as many 10's as you need for the cutter to clear the printed text.
Regards - Richard (Easify Developer)
Richard said:
Hi Will,
Welcome to the forums!
The code 27,100,48 should send 48 line feeds to your printer as an ESC/POS command, so not sure why it isn't feeding through enough to clear the printing before it cuts.
In the post print command can you replace 27,100,48 with 10,10,10,10 - the 10's are line feeds and are another way of getting the paper to feed after a print job. Add as many 10's as you need for the cutter to clear the printed text.
I worked my way up to 10,10,10,10,10,10,10 that works great but it doesn't cut the receipt. 27,100,48 cuts the receipt but cuts it too short.
Try using 10,10,10,10,10,10,10,27,100,48
You can chain as many commands together as you want - all separated by commas.
Regards - Richard (Easify Developer)
Richard said:
Try using 10,10,10,10,10,10,10,27,100,48
You can chain as many commands together as you want - all separated by commas.
Thank you Richard, this worked great.
I have been using Star TSP600 and it printed receipt on demand at the sale completion point. However, since the recent update it does not print recipt . It works on CtrlP though.
Thanks
Saty
